Roof Leak Repairs
Leaking roofs traced from the ceiling stain to the entry point and repaired at the source: tiles, pointing, valleys, flashings, box gutters.
The western and coastal suburbs take in Glenelg, Henley Beach, Grange, Findon, Semaphore and Port Adelaide, running along Gulf St Vincent and a few kilometres inland. Roofs here age faster than anywhere else in Adelaide because salt corrodes metal sheeting, gutters, valleys and screws, and the south-westerly fronts arrive straight off the water with nothing to slow them down.
The western and coastal suburbs run from Glenelg north along Gulf St Vincent through Henley Beach, Grange and Semaphore to Port Adelaide, with Findon a few kilometres inland. Salt air is the defining problem. Galvanised and older Colorbond roofs, gutters, valleys and screws corrode faster here than anywhere else in Adelaide, and fasteners lose their coating within a few years of exposure. The housing runs from Victorian cottages and 1920s bungalows under corrugated iron and terracotta tiles, through 1950s to 70s brick homes under concrete tiles, to a wave of knock-down rebuilds, townhouses and apartments with Colorbond, box gutters and membrane roofs. The sandy soil is stable, so footing movement matters less than on the clay plains, but the south-westerly fronts arrive straight off the water and lift anything loose. Port Adelaide and Semaphore add heritage constraints on iron roofs, parapets and box gutters, where repairs have to match the original profile and detailing.
5045 SA
Rusted valley irons and gutters under otherwise sound terracotta tiles on the interwar bungalows
Suburb page5022 SA
Salt pitting along cut edges and rusted screw heads on metal roofs in the first streets behind the Esplanade
Suburb page5022 SA
Corrugated iron on the original bungalows rusted under the laps and along the gutter line by salt
Suburb page5023 SA
Concrete tiles at sixty years old with surface erosion, cracks from antenna and solar installers and no remaining ridge mortar
Suburb page5019 SA
Edge corrosion, rusted screws and pinholed gutter outlets on iron and Colorbond roofs close to the foreshore
Suburb page5015 SA
Box gutters between parapets on heritage warehouses and shops blocking and ponding on large-span iron roofs
Suburb pageLeaking roofs traced from the ceiling stain to the entry point and repaired at the source: tiles, pointing, valleys, flashings, box gutters.
Full tile and metal roof restoration: clean, repairs, rebed and repoint, new valleys and flashings, then primer and two membrane coats.
Water through the ceiling, lifted sheets or ridge caps, hail and fallen branches. Made safe first, then a written quote and report.
Full roof replacement when restoring is no longer worth it: new tiles or Colorbond, battens, sarking, gutters, downpipes and flashings.
Galvanised iron, Zincalume and Colorbond: backed-out screws, lifted sheets, rust at laps and penetrations. Repaired or restored.
New Colorbond or tiles on the existing frame. Tile to metal conversions on 1960s to 80s homes and villas returned to corrugated iron.
Tell us the suburb, the roof type and what is happening. You are called back to arrange an inspection, and the quote is written before any work starts.